0 Item(s) / Total: $0

Snow Blossom Link Bracelet Project

Be the first to review
Part Number:PROJ-KS-0128
Snow Blossom Link Bracelet Project
Click Image to Enlarge

About This Project

The floral link has a wide end that allows multiple strands. So I added two beaded strands and one chain strand to each side using the chain strand to determine the length, thus allowing the outer strands a bit of "swag" or drape! I hope this project sparks some ideas of your own!


Author Karla Schafer
Karla Schafer
Auntie's Beads Designer


  1. Cut (2) chain lengths to 14 links or just under 2".
  2. Attach the chain to the center loop of the 3-strand slide lock clasp with a jump ring or jump lock. (note: when using a slide lock clasp in a design, leave it put together or closed.)
  3. Attach the other end of the chain to the end of the link finding, repeating for both sides.
  4. Cut 4" or so of beading wire and thread one end into a wire guardian, slipping it onto the top loop of the slide lock clasp, then string the crimp and crimp it with the Magical Crimp Forming Tool.
  5. For the Rondelle style, string (8) rondelles of chosen color and repeat above steps for the wire guardian and crimp, placing the strand above the chain strand onto the link and the upper loop of clasp. Repeat for the opposite side.
  6. For the Rondelle style, again string (8) rondelles of chosen color and repeat above steps for the wire guardian and crimp, placing the strand below the chain strand onto the link and the lower loop of clasp. Repeat for the opposite side.
  7. For the Jade style, string (7) 6mm jade rounds of chosen color and repeat above steps for the wire guardian and crimp, placing the strand above the chain strand onto the link. Repeat for the opposite side, but place it in the bottom loop of the clasp and below the chain strand onto the link finding.
  8. For the Jade style, string (4) 10mm jade rounds of chosen color and repeat above steps for the wire guardian and crimp, placing the strand above the chain strand onto the link. Repeat for the opposite side, but place it in the bottom loop of the clasp and below the chain strand onto the link finding.

Tools and Materials Needed:

Blue Enamel Flower Connector With Crystals, 20x80mm- 1pc
or
White Enamel Flower Connector With Crystals, 20x80mm- 1pc
5mm Silver Plated Double Link Rolo Chain By The Foot, 3' Card- 4"
Silver Plated 3-Strand Slide Lock Clasp, 16 x 6mm- 1pc
Silver Filled Wire Guardians, 10pc- 8pc
Silver Filled Crimp Beads, 2 x 2mm, 50pc- 8pc
Chinese Crystal Rondelle Bead Strand, Aqua, 6x8mm- 16pc
Chinese Crystal Rondelle Bead Strand, White Linen AB, 6x8mm- 16pc
or
6mm Jade Faceted Gemstone Bead Strand, Deep Turquoise Blue- 14pc
10mm Jade Faceted Gemstone Bead Strand, Deep Rose- 14pc
Beadalon 49-strand Wire, 30 ft., .018
Chain Nose Pliers
Nipper Tool

Customer Reviews

[rating] Stars
[short_review]
[long_review]
Did you find this helpful?  [rev_helpful] of [rev_votes] Found Helpful
Reviewed by: (Verified Buyer)  from [user_city]. [user_email] on [review_date]
[rating]/5

Materials and Supplies Used in This Project:

Silver Filled Wire Guardians, 10pc
Average Rating10 Review(s)
Beadalon 49-strand Wire, 30 ft., .018
Average Rating15 Review(s)
Chain Nose Jewelry Pliers
Average Rating6 Review(s)
Classic Nipper Tool
Average Rating26 Review(s)
 
 
 
Back to Top