Cut the curb chain into the following lengths: (4pc) 1 3/8"; (1pc)2 1/2" and set aside.
On an eye pin add the rose connector at the loop of your choice and close.
Drop a 3mm antique copper round, helix, 3mm anthique copper round onto the eye pin and create a rosary loop.
Add the drop to the middle loop of the Lydia Filigree connector.
Using the 3mm jump rings, attach one end of the chain to each of the side loops of the rose connector.
Drop a helix, 3mm antique copper bead on a head pin and start a loop.
Add the drop to the center loop of the rose finding and close the wraps trimming any excess wire.
Add a 1 3/8" piece of chain to each end of the Lydia Filigree connector using the 3mm jump rings.
You will bead into the free end of the chain connected to the filigree, cut a 12" piece of beading wire and crimp one end into the chain and string the following: 3mm antique copper round, (3)helix, for a total of (7) 3 set helix sections, ending in a 3mm antique copper round.
Crimp the end of the beading wire into another 1 3/8" piece of chain and repeat for the other side.
Add a 6mm jump ring to one end of the chain and to the other a 6mm jump ring and trigger clasp to complete the necklace. Tools and Materials Needed:
Lydia Antique Copper Filigree Connector, 32x38mm- 1pc Antique Copper 14mm Rose 4 Ring Connector- 1pc Antique Copper Curb Chain by the Foot, 4.2mm- 9" Antique Copper Pewter 3mm Round Bead Strand- 19pc Chinese Crystal 6mm Helix Bead Strand, Blue Opal AB- 44pc Antique Copper 24 Gauge Head Pins, Bag of 50- 1pc Antique Copper Plated Eye Pins, 2 Inch, 21 Gauge, Bag of 10- 1pc Antique Copper 12mm Trigger Clasps, Bag of 4- 1pc Antique Copper 3mm Open Jump Rings, Bag of 100- 4pc Antique Copper 6mm Open Jump Rings, Bag of 50- 2pc Antique Copper Plated Recycled Copper Crimp Beads, Bag of 100- 4pc Beadalon 49-strand Wire, 30 ft., .018- 24" Chain Nose Pliers Round Nose Pliers Or Wire Looping Pliers Nipper Tool