Create your own jump rings in a variety of gauges with the EZ Jump Rings large jump ring maker. Use to make 10, 12, 14 and 16mm jump rings. Comes complete with 4 metal mandrels and handle. Mandrels have a threaded top that screws into the handle. Instructions:
- Select one of the 4 included mandrels based on the desired ring diameter, and screw the mandrel into the handle.
- Insert wire into the small hole in the base, then secure the end by folding it down.
- Hold the mandrel and wire with one hand and place one finger from the other hand into the large hole in the base. Rotate it clockwise to make the wire form a coil around the mandrel.
- Remove the coil and cut it with a flush-cutter to create separate open rings.