Although expensive, especially for goldplate, these crimp ends are indispensable for nicely finishing .7mm beading chain. I put a dab of glue on the end of the chain before placing and crimping.
Did you find this helpful? Reviewed by: Joy Jones from Washington DC.
Questions and Answers
Q:Would this crimp end accomodate 2 ends of a .18 flex wire? Thank you if not what at your store would work. I need to fit 2 pieces of flex wire through the crimp. I know the 2mm crimp tubes work but I have nothing to attach then to an earring wire.
A: Diana, If you use a 19 strand beading wire, it should work. I thought for sure I had made some for the web like that, but couldn't find them. However I did find some other options that may work too. You can use a 2x2 crimp and form a loop out of one piece of the wire like I did here: http://www.auntiesbeads.com/Have-Heart-Earrings-Archive_p_7642.html Or you can use a clam shell beading tip, as in this example: http://www.auntiesbeads.com/Crystalline-Drop-Earrings-Archive_p_7640.html You could also use two of the beading wire crimp ends and attach them to a jump ring as in this example: http://www.auntiesbeads.com/Trapeze-Earrings-Archive_p_3704.html I hope one or all of these help! Karla
Was this answer helpful?0 of 0 Customer(s) found this Answer helpful. Answer provided by: Karla Schafer (7/16/2014)
Q:Are these sold individually? Or do they come in a bag in a bunch I need 12. If they come in a bunch, I'll need 1
A: Yes it does come in gunmetal. The pic does not show how it looks, it looks just like the others and like in my usage video. I will make a note to have that re-photographed. Thanks
Was this answer helpful?0 of 0 Customer(s) found this Answer helpful. Answer provided by: Karla Schafer (9/17/2014)