Step 1. Use your nipper tool to cut your chain into three pieces: One with 10 chain links, one with 7 chain links, and one with 4 chain links.
Step 2. Use your pliers and a head pin to dangle a garnet crystal from the bottom of your 10 link piece of chain. Skip a chain link, then dangle a light smoked topaz crystal. Repeat this one more time so that you have 4 crystals hanging from this piece of chain. Set aside.
Step 3. Repeat this process on your 7 link piece of chain, but begin with a light smoked topaz crystal and only hang 3 crystals total. On your 4 link piece of chain, hang only two crystals, starting with a garnet crystal.
Step 4. Use pliers to carefully open the eye of your french wire. Hang each of your 3 pieces of chain from it and then squeeze it closed around them. Repeat for a matching earring!
Materials and Tools Needed:
Swarovski Crystal, 4mm Bicone, Bag of 10, Light Smoked Topaz (1)
Swarovski Crystal, 4mm Bicone, Bag of 10, Garnet (1)
Silver Plate Hammered Curb Chain by the Foot, 3.5mm (1)
Sterling Silver French Wires, Bag of 10 (1)
1 1/2 Inch Sterling Silver Head Pins, 24 Gauge, Bag of 10 (2)
Mini Round Nose Pliers (1)
Nipper Tool (1)